Annex B. Measurement Conditions

Table B.1. Registration of measuring conditions for air measurement (partly according to Danish Transport, Construction, and Housing Authority, 2015).


Are occupants present?	Yes	No
Are operational levels normal?
Short collection period (min. 4 hours)?
Exclusive of dust collection?
Airing prior to conditioning?
Min. conditioning of 8 hours’ duration?
Were doors/windows closed during conditioning and sampling?
Other remarks:
What is the level of cleaning, and was cleaning done as usual?
Room ID:	Room ID:	Room ID:

Was there any incident solar radiation during measurements? (yes/no)
Room ID:	Room ID:	Room ID:

Which direction do the windows face?
Room ID:	Room ID:	Room ID:

Ambient temperature and humidity at start of measurement:
Room ID:	Room ID:	Room ID:

Ambient temperature and humidity at end of measurement:
Room ID:	Room ID:	Room ID:

Weather conditions during measurement	Start	end

At start and at the end: Is the room located on the lee or windward side of the building?
Room ID:	Room ID:	Room ID:

Date:	Person responsible for the measurement:

Table B.2. Measuring PCBs in indoor air (Danish Transport, Construction, and Housing Authority, 2015).
Measuring PCBs in Indoor Air

Date
Sample no.
Sample type
Name of person responsible for the measurement
Room ID:
Address
Room type, room area, and volume
Measurement location in room (description, photo)
Height above floor level
Reference no. on sketch
Pump type and date of calibration
Pump no.
START	Date
	Time
	Counter (m³)
	Temperature room °C
	Temperature pump °C
FINISH	Date
	Time
	Counter (m³)
	Temperature room °C
	Temperature pump °C

REMEMBER: Please take a photo of measurement locations before and after sampling.